Protective Cable Sleeve - Fits up to 3/16" Cable Railings - T316 Stainless Steel

Description

Protective Cable Sleeve - Fits up to 3/16" Cable Railings - T316 Stainless Steel
This is a protection cable sleeve of ours that we’d like to give you more detail about. They are primarily used when you need to bend around corners while you’re using wooden posts. You can not only use them around a corner at a 45 but also with a staircase where it’s straight and then slopes up or down. They will protect your posts from collapsing under the pressure over time.
They’re also wonderful to use with all of your intermediate posts. When you’re drilling the posts through you will notice that it’s really really hard to keep them from splintering as you pop through the other side. We recommend that you drill from both sides of the post to avoid splintering as well as to avoid the drill bit from wandering with the grain inside the post. When you’re drilling into wood it’s really hard to keep the wood from splintering a little bit so our protective sleeves will conceal any sort of imperfections in your wood posts and just add to that nice clean finished look that you’re shooting for.
They are designed to work wonderfully with ⅛” cable along with 3/16” cable. One more use for our protective sleeves is to use them in conjunction with our angled washers. The use for this is on a stair on the intermediate post, we’ve had this cable sleeve designed a little bit longer so that you can use it in this way and it can still grip inside the post.
Dimensions & Weight
– Total Length: .75″
– Head: 0.48″ x 0.07″
– Body: .25"
– Weight: 0.01 lb
Those who have purchased this cable sleeve also purchased the following from us
– 1/8″ Stainless Steel Cable > 100ft, 500ft, 1000ft
– 3/16″ Stainless Steel Cable > 100ft, 500ft, 1000ft
– A Cable Cutting & Swaging Tool > 16 Ton Hydraulic Swaging Tool, 24″ Cutting & Cable Swaging Tool, Cable Cutter Tool
– Stainless Steel Spray Cleaner & Protectant > CitriSurf 77 Plus
Please feel free to Contact Us should you have any questions or just for a few tips & tricks!