Nordson ECP-30 Pattern Glue Controller, Easy-to-use, control systems

Description

Nordson ECP-30 Pattern Glue Controller, Easy-to-use, control systems
New (never used)
Easy-to-use, advanced pattern control systems deliver flexible performance and precise adhesive placement.
Eclipse series (EPC) pattern controls deliver application flexibility and precise adhesive placement. Both the EPC-30 and EPC-15 accommodate random-size cases automatically, and provide real- time pattern adjustment capability. The unique trigger memory enables closer spacing of products, maximizing operational efficiencies and productivity.
EPC-30
n
Distance-based program
for constant or variable line speeds (300m/min or 984 ft/min); bead placement is ± 1 millimeter.
n
Autoscaling capability
automatically calculates encoder settings, reducing lengthy setup time.
n
Memory capability
for up to 50 separate patterns.
n
Controls
up to four independent gun outputs; produces up to 24 beads per output.
n
Stores
up to four consecutive trigger events providing flexibility in trigger location and closer product spacing.
n
PC interface
allows programming from an industrial PC or notebook, useful for large operations with numerous production lines or multiple facilities.
n
Run-up capability
maintains bead volume during line speed changes.
n
Enables adhesive savings
with OptiBond? intermittent bead dispensing.
EPC-15
n
Time-based program
for constant line speeds (150m/min or 500 ft/min); bead placement is ±1 millisecond.
n
Autoscaling capability
automatically calculates line speed for easy setup by product size.
n
Memory capability
for up to 25 separate patterns.
n
Controls
up to four independent gun outputs; produces up to eight beads per output.
n
Stores
up to four consecutive trigger events providing flexibility in trigger location and closer product spacing.
n
Three trigger input capability
enables timer to control several lines, cost-effectively reducing equipment needs.
n
Easy to read display
can be accessed in five languages: English, French, German, Spanish and Italian.
n
Three remote programmable inputs
allow remote program recall or lockout.
n
Enables adhesive savings
with OptiBond? intermittent bead dispensing.
Eclipse
?
Series (EPC)
Pattern Control Systems
Specifications
Pattern Control System EPC-30 EPC-15
Max. Line Speed 300 m/min (984 ft/min) 150 m/min (500 ft/min) Pattern Accuracy (max. line speed)
1
±1mm (0.1 in.) ±1ms
Max. Beads per Output 24 8
Program Memory up to 50 up to 25
Independent Gun Outputs 4 4
Independent Trigger Inputs 2 3
Enclosure Rating
2
IP54 IP54
Approvals UL, CUL, CE CE
Input/Output Remote I/O board 3 programmable inputs
Main Control Unit
Input Voltage Requirement 18-30 VDC 12-30 VDC
Voltage/Amperage per Output
3
24 VDC/1.10 A 24 VDC/1.10 A
Run Permissive Input 24 VDC N/A
Trigger
Required Supply Voltage/Current 18-30 VDC/150 mA max. 18-30 VDC/150 mA max.
Type Retro-reflective or diffuse reflective Retro-reflective or diffuse reflective
Output Type NPN transistor NPN transistor
Output Load Current 20 mA 20 mA
Enclosure Rating IP54 IP54
External Power Supply
Input Voltage 100-240 VAC (universal) 100-240 VAC (universal) Input AC Frequency 47-63 Hz 47-63 Hz
Output Voltage 24 VDC 24 VDC
Max. Output Current 2.5 amps 2.5 amps
Notes: 1. For most typical packaging applications and proper setup.
Based upon the use of watertight conduit fittings (dust protected, splash resistant).
Total current rating of all gun actuators (pneumatic solenoid valves or electric gun drivers) should not exceed current rating of system power supply.
EPC-30 Line Speed and Run-up Control
Encoder
Encoder Type Quadrature
Resolution 500 pulses/revolution
Output 12V differential line driver
Mounting Metric or U.S. Standard
Enclosure Rating IP66
Frequency Max. 100 KHz
I/P Transducer
Input Current 4-20 mA
Output Air Pressure 13.8-620 kPa (2-90 psi) 9-pin
Supply Air Pressure 656-1035 kPa (95-150 psi)
EPC-30 I/O and PC Communications
I/O Board
Independent Pressure-Control Outputs 2
Voltage and Control Outputs/Inputs 0-10 VDC/4-20 mA
Program Recall 4-15 programs
Inputs (Unit Enable and Unit Disable) 2
Outputs (Low Line Speed and Fault/Warning) 2
PC Interface Software
Operating System Requirements Windows® 95
PC Connector Standard serial 9-pin
Please feel free to call if you have any questions. I also have another Controller but it is a different Model ECP-15. I know these controllers very well and I know how to program them.